Guchen GC-EVS series Electric Vehicle AC Compressor Introduction

Every day, people have to face the fuel consumption when they take a bus or drive a car, which makes our environment become polluted. More and more organizations begin to turn their attention on new energy vehicles, such as full electric bus, trams, trolley bus, electric cars...

Guchen GC-EVS series electric scroll compressor adopt DC150V-420V or DC400V-720V voltage, used for all kinds of vehicle air conditioners such as bus ac, sleeper truck cab ac, car ac it also can be used for vehicle battery heating system. 


PHOTO: Guchen Electric scroll compressors for the full electric vehicle air conditioners 

Guchen GC-EVS series Electric Vehicle AC Compressor Features

1. Light Weight

Compared with the traditional compressors, Guchen GC-EVS series compressors are very light, only 7.5KG, save the power consumption a lot.
2. Reliability

Flexible scroll compression structure; Resistance the liquid refrigerant assault; Smooth operation, low noise and less vibration.

3. Environmental Friendly

Environmentally friendly refrigerant, adopts R407C refrigerant.

4. High efficiency DC frequency conversion technology

Connect the DC high pressure voltage DC150V-420V or DC400V-720V voltage, so customers don’t need to buy a transformer to transform the voltage.

5. Specialized for full electric bus ac or hybrid bus ac

Modulation design for EV/HEV/PHEV/FCEV. 

Guchen GC-EVS series Electric Bus AC Compressor Application

1. Truck Sleeper Cab Air Conditioners
2. Full Electric Bus Air Conditioners
3. All kinds of  Car Air Conditioners
4. Vehicle Battery Heating System

Guchen GC-EVS series Electric Bus AC Compressor Technology Data 

Model

GCEVS24C

GCEVS34C

Refrigerant

R407C

Displacement(cc/rev)

24.0

34.0

Power type

DC(150V~420V) or DC (400v~720v)

Speed range(rpm)

2000~6000

Communication protocol

CAN 2.0b or PWM

Operation environmental temperature (℃)

-40 ℃~80℃

Oil type

POE HAF68(100mm)

POE HAF68(150mm)

Max.cooling capacity (w)

8200

11100

COP (W/W)

3.0

3.0

Test condition

Ps/Pd=o.2/1.4Mpa(G),SH/SC=11.1/8.3℃

Compressor length L(mm)

245

252

Suction diameter D1(mm)

18.3

21.3

Discharge diameter D2(mm)

15.5

Weight of the compressor (kg)

                                                           6.9                                                            

                                               7.5                                                 

  


How to Install GC-EVS series Bus Air Compressor

The compressor should be kept in the horizontal direction and the suction port should be kept up (shown as standard installation method, if necessary for other installation methods, both sides must confirm the consultation), in the actual installation of the compressor to allow the direction of tilt within 10 °. Compressor at installation

The direction of the axis is perpendicular to the direction of travel. If the compressor and the grounding function of the metal bracket can not be set to connect the ground, otherwise you need to set up a separate grounding device, can be installed in the foot when the foot shown in the location shown in the figure.